![]() |
![]() |
![]() |
This page explains the feature of DS-510.
DS-510 has the following features:
![]()
Supports Gigabit Ethernet
High-speed data transfer with Gigabit Ethernet (1000BASE-T) as well as 100BASE-TX/10BASE-T Ethernet (auto-sensing).
![]()
Easy Configuration
If a DHCP server (or broadband router with DHCP function) is installed to your network, you can use the DS-510 just by connecting it to the network.
Also, when you want to assign IP address to your network devices manually, you can easily configure the DS-510 using the Device Server Setup which can be downloaded from our website.
![]()
USB Device Server Feature
- Share various USB devices
By using DS-510 and the bundled utility, SX Virtual Link, you can share various USB devices such as printers, scanners and storage devices among Windows or Macintosh computers ( refer to Software Specifications ). DS-510 allows you to use USB devices as if they were connected directly to your computer.
( For details on SX Virtual Link, refer to What is SX Virtual Link?.)
- Support USB device that uses isochronous transfer
You can share the USB devices that use isochronous transfer (e.g. Web camera, USB speaker, etc) over the network. For the isochronous devices, it is recommended to use Gigabit Ethernet environment.
- Printer auto connection
When printing to a USB device, the print operation executed to the device will automatically prompt SX Virtual Link to connect with the device to print and disconnect after the job is printed. It is not required to manually connect to the device with SX Virtual Link for printing.
![]()
Print Server Feature
- Supports Raw/LPR/IPP printing
DS-510 supports three types of network printing protocols; Raw, LPR and IPP, which are commonly used by users.
When a printer is connected to DS-510, you can use standard Windows printing feature.
![]()
ECO Mode
If DS-510 is not used for a specified period of time, it will switch to ECO Mode which turns off the USB Bus power. This feature allows you to save power used by USB Bus powered devices connected to DS-510. As soon as DS-510 is used during ECO Mode, the USB Bus power will automatically be switched on again.
Please note that DS-510 will not switch to ECO Mode if the USB device connection utility, "SX Virtual Link", is active on any computers in your network. Please shut down all computers that have SX Virtual Link installed or close SX Virtual Link on each computer to use this feature.
![]() |
|
![]() |
![]() |
![]() |
![]() |